h1

PP tube amp ECC81-EL84(ЕЛ84)-2x6P7S (6П7С)

декември 30, 2015

 

Let me introduce you my valve amplifier – PP 2.1  ECC81- EL84 (ЕЛ84) – 2 x 6P7S (6П7С) .
This beautiful amplifier with a very distinctive sound is a must for every connoisseur. It has been designed for a very wide range of music styles and sounds amazing.
I offer custom built amplifiers. The wooden frame is available in 2 versions – bleached oak and American walnut. I can also do other types from various well selected dried trees.
All wires and passive components are high quality and have been chosen after long hours of listening tests and upon the feedback from our clients. Electrical parts from Pentod LTD  and  Exproject .
The power transformer is made by Bultraf. It has got high parameters which determine its great performance.
Regarding power filtering: It is made with two separate independent „circle.“ NOS Svetlana 5C3S a very good  rectifier tube.  For each „circle“ filtration is standard for this type of amplifiers “CLCRCRC”. Тhere are two chokes 6H 150mA.
Filtering capacitors: Mundorf, Nichicon, Simens, Roe and ather depending on their purpose.

Output transformers:
The output transformers are made in Bulgaria by me one of the best in this sector. High quality, Italian transformer cores.

The input and output terminals are gold-plated and of ordinary quality. I would highly recommend the output terminals manufactured by IK-Audio. They are made very precisely and produce marvelous sound.

The volume control is 24 steps (50 Кohm). Fine and accurate adjustment of the signal in both channels.

Parameters:
The calculated output power is 15,4W / 4 and 8 Ohm.
Actual measurement are 12,4W / 4 and 8 Ohm.
Power supply transformer : 230-245V 50-60Hz  330W
Power input : 172W
More parameters and measurements upon purchase.
For further information please contact me by email or phone.
Contact : 5100 Gorna Orqhovica, Bulgaria,       phone:  +359 883 37 18 40     e-mail: momchil87@gmail.com

 

h1

PP tube amp 6N7S (6Н7С) – 2 x 6P7S (6П7С)

август 25, 2015

Let me introduce you my valve amplifier PP 1.1  6N7S (6Н7С)- 2 x 6P7S (6П7С) .

This beautiful amplifier with a very distinctive sound is a must for every connoisseur. It has been designed for a very wide range of music styles and sounds amazing.
I offer custom built amplifiers. The wooden frame is available in 2 versions – bleached oak and American walnut. I can also do other types from various well selected dried trees.
All wires and passive components are high quality and have been chosen after long hours of listening tests and upon the feedback from our clients. Electrical parts from Pentod LTD  and  Exproject .
The power transformer is made by Bultraf. It has got high parameters which determine its great performance.
Regarding power filtering: It is made with two separate independent „circle.“ NOS Svetlana 5C3S a very good  rectifier tube.  For each „circle“ filtration is standard for this type of amplifiers “CLCRCRC”. Тhere are two chokes 6H 150mA. Filtering capacitors: Mundorf, Nichicon, Simens, Roe and ather depending on their purpose.
Output transformers:
The output transformers are made in Bulgaria by me and AudioPlatinium who are one of the best in this sector. High quality, Italian transformer cores.

The input and output terminals are gold-plated and of ordinary quality. I would highly recommend the output terminals manufactured by IK-Audio. They are made very precisely and produce marvelous sound.

The volume control is 24 steps (50 Кohm). Fine and accurate adjustment of the signal in both channels.

Parameters:
The calculated output power is 12,5W / 4 and 8 Ohm.
Actual measurement are 10,5W / 4 and 8 Ohm.
Power supply transformer : 230-245V 50-60Hz  330W
Power input : 139W
More parameters and measurements upon purchase.
For further information please contact me by email or phone.
Contact : 5100 Gorna Orqhovica, Bulgaria,       phone:  +359 883 37 18 40     e-mail: momchil87@gmail.com
h1

SE tube amp 6S2S (6С2С) – 6P7S (6П7С)

август 17, 2015

 

Let me introduce you my valve amplifier SE 1.1  6S2S (6С2С) – 6P7S (6П7С).

This beautiful amplifier with a very distinctive sound is a must for every connoisseur. It has been designed for a very wide range of music styles and sounds amazing.
I offer custom built amplifiers. The wooden frame is available in 2 versions – bleached oak and American walnut. I can also do other types from various well selected dried trees.
All wires and passive components are high quality and have been chosen after long hours of listening tests and upon the feedback from our clients. Electrical parts from Pentod LTD  and  Exproject .
The power transformer is made by Bultraf. It has got high parameters which determine its great performance.

Regarding power filtering: It is made with two separate independent „circle.“ NOS Svetlana 5Ц4M a very good  rectifier tube.  For each „circle“ filtration is standard for this type of amplifiers “CLCRCRC”. Тhere are two chokes 6H 150mA. Filtering capacitors: Mundorf, Nichicon, Simens, Roe and ather depending on their purpose.

Output transformers:
The output transformers are made in Bulgaria by me and AudioPlatinium who are one of the best in this sector. High quality, Italian transformer cores.

The input and output terminals are gold-plated and of ordinary quality. I would highly recommend the output terminals manufactured by IK-Audio. They are made very precisely and produce marvelous sound.

The volume control is 24 steps (25 Кohm). Fine and accurate adjustment of the signal in both channels.

Parameters:
The calculated output power is 4,2W / 4 Ohm and 8 Ohm.
Actual measurement are 3,8W / 4Ohm and 8 Ohm.
Power supply transformer : 230-245V 50-60Hz  330W
Power input : 93W
More parameters and measurements upon purchase.
For further information please contact me by email or phone.
Contact : 5100 Gorna Orqhovica, Bulgaria,       phone:  +359 883 37 18 40     e-mail: momchil87@gmail.com

 

 

h1

Produce of any connecting wires.

март 28, 2015

Produce of any connecting wires, according to the purpose and type them.

Mainly produce Audio connecting wires, but I can make what you have seen even more.

(S/PDIF,stereo jack to cinch ,Canon XLR, RCA interconnect, USB, LAN, HDMI, PSU ……) .

The materials I use; silver-plated conductors for ships and planes construction, quality connectors, beautiful finishes.

 

h1

A new home and a new beginning.

ноември 8, 2014

 

 

h1

Black Panther – tube amp 6Э5П-Г807

юни 27, 2014

An amplifier made ​​with great desire and a lot of work.
The first stage is 6Э5P a vacuum tube with huge potential and opportunities, and the output tube G807 .

Used entirely and only vacuum tube in construction, even rectifying of high voltages are with tube.

Done everything to achieve the best possible and true sound . All wires are specially selected and passive components are high-level and class.

The input signal is an analog.

The output signal for 4 Ohm and 8 Ohm. They are on separate terminals at the rear of the amplifier.

 Power transformer is made from Bultraf made ​​with high parameters and additional requirements to better performance and results. http://www.bultraf.com/index.php

Regarding power filtering: It is made with two separate independent „circle.“ NOS Svetlana 5Ц4С) a very good  rectifier tube.  For each „circle“ filtration is standard for this type of amplifiers “RCLCRC”.All components are considered to assist and better efficiency of the amplifier. Тhere are two chokes 8H 200mA.
Filtering capacitors: Mundorf, F&T, Simens, Roe and ather depending on their purpose.

Output transformers: 
High quality, Italian, silicon steel sheet  for transformer cores.
TECHNICAL SPECIFICATIONS:
Ra = 5K / 4Ohm; 8Ohm
R1 = 270Ohm
L=10H
Ls<15mH
Ia(max)=80mA

Volume control 24steps: One piece 25 Kohm included in the set. https://momchil.wordpress.com/#jp-carousel-418

As a whole amplifier is the result of a lot samples and attempt gained over the years.
I offer it with diagrams and measurements in two versions as and sold.

Calculated output power is  7W / 4 Ohm and 8 Ohm.
Measured for the time is near 6,5W / 4Ohm and 8 Ohm.
Power supply: 220-240V 50-60Hz  280W
More parameters and measurements upon purchase.

Prices are much lower than the total cost of the used parts.
For further information please contact me by email or phone.

Contact : 5100 Gorna Orqhovica, Bulgaria,       phone:  +359 883 37 18 40     e-mail: momchil87@gmail.com

h1

DIY kit tube amp 6Э5П-Г807

ноември 1, 2013

DIY kit, SE class А tube amplifier,  cascade structure with a capacitive connection between the inlet and outlet tube.
The input amplifier is 6Э5П a lamp with a huge potential and opportunities, and the output  G807 ( Г807 ).

Regarding power: It is made with two separate independent „circle.“ NOS Svetlana 5C4S  a very good  rectifier tube.  For each „circle“ filtration is standard for this type of amplifiers “CLCRC”.All components are considered to assist and better efficiency of the amplifier.
Choke – 2x8H – 200mA  (150 Оhm)
Power transformer is made from Bultraf made ​​with high parameters and additional requirements to better performance and results. http://www.bultraf.com/index.php

Output transformers: 
High quality, Italian, silicon steel sheet for transformer cores.
TECHNICAL SPECIFICATIONS:
Ra = 5K / 4Ohm; 8Ohm
R1 = 270Ohm
L=10H
Ls<15mH
Ia(max)=80mA

Sockets: The package for each lamp – 6 pieces.
Lamps: The set  2х 6Э5П , 2х Г807 and 2х 5ц4с.
Filtering capacitors: Mundorf, F&T, Simens, Roe and ather depending on their purpose.
Resistors:  Mills, Kiwame,Tesla and ather depending on their purpose.
Volume control 24steps: One piece 25 Kohm included in the set. https://momchil.wordpress.com/#jp-carousel-417

As a whole amplifier is the result of a lot samples and attempt gained over the years.
The output power is close at 7W of channel.
Power supply: 230-240V 50-60Hz 280W
I offer it with diagrams and parameters .

Contact : 5100 Gorna Orqhovica, Bulgaria,       phone:  +359 883 37 18 40     e-mail: momchil87@gmail.com

Follow

Get every new post delivered to your Inbox.